Interior Vertical Coatings

DC600 water-based thin mil vertical Epoxy

Epic DC600 Water-Based, Thin- Mil Vertical is a two-component water-based epoxy coating that is specifically designed for interior vertical applications. This product can be applied up to 8 mils per coat without sagging. DC600 Vertical exhibits chemical resistance and abrasion resistance and is recommended as a primer for DC610 or DC620 or stand-alone coating for a variety of substrates, including concrete, wood, masonry, building panels, and many other surfaces.

COVERAGE PER GALLON: 200-250 square feet per gallon @ 6-8 mils
STANDARD COLORS: Off white, light gray, medium gray, and tile red.
PACKAGING INFORMATION: 2-gallon kits

DC610 High Build Vertical Epoxy

DC610 is a two-component 100% solids epoxy, colored coating designed for applications to interior vertical surfaces at a high build without sag or slump. Recommended for cement, concrete, or brick applications up to 12 mils thick.

STANDARD COLORS: White, off white, light gray, medium gray, and beige
COVERAGE PER GALLON: 135 - 265 square feet per gallon @ 6-12 mils
PACKAGING INFORMATION: 1 or 5-gallon kits

DC620 High Build Deep Fill Vertical Epoxy

DC620 is a two-component 100% solids epoxy colored coating designed for applications to interior vertical surfaces at a high build while resisting sags or slump. Recommended for cement or concrete block applications up to 15 mils thick without runs at 70F. Good resistance from sags or runs, from 10-20 mils at 70F. Designed for use over block or substrates where smoothing is required. Greatest level of hide over bumps and grout lines. This product is used in high use areas where frequent wash downs are done.

COVERAGE PER GALLON: 80-160 square feet per gallon @ 10-20 mils
STANDARD COLORS: White, off white, light gray, medium gray and beige
PACKAGING INFORMATION: 1 or 5 gallon kits