EPIC DC110 is a fast-cure water based epoxy coating used in combination with self leveling cement products, such as Epic XL Wear Topping. DC110 is clear in color and provides excellent adhesion to substrates. For areas where there will be high traffic such as retail, hospitality, warehouse, etc. Excellent abrasion and chemical resistance. Can support traffic in as little as 6-12 hours. Exhibits low to no odor.
PACKAGING: 2 gallon and 5 gallon kits (volume approx.)
COVERAGE PER GALLON
230 to 320 square feet @ 5-6 mils wet thickness
RECOMMENDED FILM THICKNESS:
5-7 mils per coat wet thickness (yields 2-3.5 mils dry)
MIX RATIO:
6.95# part A (.80 gallons, approximate) to 1.75# part B (.20 gallons, approximate).
CURE SCHEDULE: (70°F)
pot life – 1 gallon volume ……………..……………….…. 2.0 hours
tack free (dry touch).....…………………………………...... 2-4 hours
recoat or topcoat...………………………………………….. 4-6 hours
light foot traffic... …………………………………….…... 6-12 hours
full cure (heavy traffic) …………………………………….. 2-5 days
APPLICATION TEMPERATURE: 55-90 degrees F with relative humidity below 85%
FINISH CHARACTERISTICS: Gloss (>60 @ 60 degrees @ glossmeter)
ABRASION RESISTANCE: Taber abrasor CS-17 calibrase wheel with 1000 gram total load and 500 cycles = 45 mg loss
IMPACT RESISTANCE: Gardner Impact, direct = 50 in. lb. (passed)
FLEXIBILITY: No cracks on a 1/8” mandrel
ADHESION: 425 psi @ elcometer (concrete failure, no delamination)
VISCOSITY: 400-900 cps (typical)
